|
OETIKER 2-EAR CLAMP
OETIKER 2-Ear Clamps
are widely used for medium pressure maintenance and OEM
applications. They're installed on air, fluid, gas and
steam lines. The one piece design offers a positive,
tamper-proof seal without damage to the hose. Oetiker
2-Ear Clamps assure adequate closure and compensate for
tolerane variations in hose sizes. While both ears
must be closed, 2-Ear Clamps are best installed when one ear
is closed all the way first. The second ear is then
closed so that the first ear opens slightly (gap to be
approximately 1.5 mm). This builds a resilient
strength into the clamp in a spring-like action to hold
against pressure, vibration and hose shrinkage due to
temperature changes or aging.
| Item
Number |
Size Ref. |
Nominal Size |
Inches
Closed - Open |
Millimeters
Closed - Open |
Band Width
Inches - mm |
| 15100002 |
0305 |
3/16" |
0.118 - 0.197 |
3.0 - 5.0 |
0.197- 5.0 |
| 15100003 |
0507 |
1/4" |
0.197 - 0.276 |
5.0 - 7.0 |
0.236 - 6.0 |
| 15100004 |
0709 |
5/16" |
0.276 - 0.354 |
7.0 - 9.0 |
0.276 - 7.0 |
| 15100023 |
0811 |
3/8" |
0.315 - 0.433 |
8.0 - 11.0 |
0.276 - 7.0 |
| |
|
|
|
|
|
| 15100005 |
0911 |
7/16" |
0.433 - 0.512 |
9.0 - 11.0 |
0.276 - 7.0 |
| 15100006 |
1113 |
1/2" |
0.345 - 0.512 |
11.0 - 13.0 |
0.276 - 7.0 |
| 15100007 |
1315 |
9/16" |
0.521 - 0.591 |
13.0 - 15.0 |
0.295 - 7.5 |
| 15100008 |
1517 |
19/32" |
0.591 - 0.669 |
15.0 - 17.0 |
0.315 - 8.0 |
|
|
|
|
|
|
| 15100009 |
1518 |
5/8" |
0.591 - 0.708 |
15.0 - 18.0 |
0.315 - 8.0 |
| 15100010 |
1720 |
3/4" |
0.669 - 0.787 |
17.0 - 20.0 |
0.335 - 8.5 |
NOTE:
When ordering, select the nominal size nearest to,
but always larger than the outside diameter of the material
to be clamped. That outside diameter should be
determined with the connection fully assembled. We
strongly recommend using Oetiker Pincers for proper
installation.
We reserve the right to change dimensions and/or
specifications without prior notice. |
)