|
OETIKER 1-EAR SPECIAL CLAMP
OETIKER 1-Ear
Special Clamps are
made from tubing. They are used in places where
clamping a second ear is impractical, although the 2-Ear
Clamp has a broader clamping range. Since these clamps
have a smooth inner band surface, the hose or other material
is not chewed up when subjected to pulsation, expansion or
contraction.
| Item
Number |
Size Ref. |
Nominal Size |
Inches
Closed - Open |
Millimeters
Closed - Open |
Band Width
Inches - mm |
| 15300003 |
5.1 |
3/16" |
0.161 - 0.201 |
4.1 - 5.1 |
0.157 - 4.0 |
| 15300004 |
6.1 |
15/64" |
0.201 - 0.240 |
5.1 - 6.1 |
0.157 - 4.0 |
| 15300005 |
6.6 |
1/4" |
0.220 - 0.260 |
5.6 - 6.6 |
0.157 - 4.0 |
| 15300006 |
7.0 |
9/32" |
0.240 - 0.276 |
6.1 - 7.0 |
0.157 - 4.0 |
| |
|
|
|
|
|
| 15300007 |
7.5 |
19/64" |
|
|
0.197 - 5.0 |
| 15300008 |
8.0 |
5/16" |
0.268 - 0.315 |
6.8 - 8.0 |
0.197 - 5.0 |
| 15300010 |
8.7 |
11/32" |
0.295 - 0.343 |
7.5 - 8.7 |
0.197 - 5.0 |
| 15300012 |
9.5 |
3/8" |
0.311 - 0.374 |
7.9 - 9.5 |
0.236 - 6.0 |
|
|
|
|
|
|
| 15300013 |
10.0 |
25/64" |
0.335 - 0.394 |
8.5 - 10.0 |
0.236 - 6.0 |
| 15300014 |
10.5 |
13/32" |
0.351 - 0.413 |
8.9 - 10.5 |
0.236 - 6.0 |
| 15300015 |
11.0 |
27/64" |
0.370 - 0.433 |
9.4 - 11.0 |
0.236 - 6.0 |
| 15300016 |
11.3 |
7/16" |
0.376 - 0.445 |
9.6 - 11.3 |
0.236 - 6.0 |
|
|
|
|
|
|
| 15300017 |
11.8 |
29/64" |
0.398 - 0.465 |
10.1 - 11.8 |
0.236 - 6.0 |
| 15300018 |
12.0 |
15/32" |
0.398 - 0.472 |
10.1 - 12.0 |
0.236 - 6.0 |
| 15300019 |
12.3 |
31/64" |
0.406 - 0.484 |
10.3 - 12.3 |
0.236 - 6.0 |
| 15300020 |
12.8 |
1/2" |
0.425 - 0.504 |
10.8 - 12.8 |
0.236 - 6.0 |
|
|
|
|
|
|
| 15300021 |
13.3 |
33/64" |
0.448 - 0.524 |
11.4 - 13.3 |
0.236 - 6.0 |
| 15300023 |
14.0 |
35/64" |
0.476 - 0.551 |
12.1 - 14.0 |
0.236 - 6.0 |
| 15300024 |
14.5 |
9/16" |
0.492 - 0.571 |
12.5 - 14.5 |
0.236 - 6.0 |
| 15300027 |
16.0 |
5/8" |
0.555 - 0.630 |
14.1 - 16.0 |
0.236 - 6.0 |
|
|
|
|
|
|
| 15300030 |
17.5 |
11/16" |
0.602 - 0.689 |
15.3 - 17.5 |
0.236 - 6.0 |
NOTE:
When ordering, select the nominal size nearest to,
but always larger than the outside diameter of the material
to be clamped. That outside diameter should be
determined with the connection fully assembled. We
strongly recommend using Oetiker Pincers for proper
installation.
We reserve the right to change dimensions and/or
specifications without prior notice. |
)