OETIKER 1-EAR CLAMP

The OETIKER 1-Ear Clamp, made of bandsteel, is our most economical style of clamp.  It features a reinforcing "dimpled" ear to hold against pressure and vibration.  The ends are locked mechanically for extra strength. 

 

 

Item Number Size Ref. Nominal Size

Inches

Closed - Open

Millimeters

Closed - Open

Band Width

Inches - mm

15500000 10.5 3/8" 0.350 - 0.414 8.9 - 10.5 0.28 - 7.0
15500001 11.3 7/16" 0.381 - 0.444 9.7 - 11.3 0.28 - 7.0
15500002 12.3 15/32" 0.394 - 0.486 10.4 - 12.3 0.28 - 7.0
15500003 13.3 1/2" 0.453 - 0.524 11.4 - 13.3 0.28 - 7.0
           
15500006 14.0 35/64" 0.472 - 0.551 12.9 - 14.0 0.28 - 7.0
15500007 14.5 9/16" 0.496 - 0.571 12.6 - 14.5 0.28 - 7.0
15500008 15.7 5/8" 0.543 - 0.618 13.8 - 15.7 0.28 - 7.0
15500009 17.0 11/16" 0.594 - 0.669 15.1 - 17.0 0.28 - 7.0
15500010 18.5 23/32" 0.618 - 0.728 15.7 - 18.5 0.28 - 7.0
15500011 19.8 3/4" 0.669 - 0.779 17.0 - 19.8 0.28 - 7.0
15500012 21.0 13/16" 0.716 - 0.827 18.2 - 21.0 0.28 - 7.0

NOTE: When ordering, select the nominal size nearest to, but always larger than the outside diameter of the material to be clamped.  That outside diameter should be determined with the connection fully assembled.  We strongly recommend using Oetiker Pincers for proper installation.

We reserve the right to change dimensions and/or specifications without prior notice.



image
image